Sparkfun Diary

 Material: 1. Arduino, Connector, Jumping wires, Servo motor, Breadboard, Sound Sensor, 3-D Printed Ganpati, Craft hand.  Circuit Diagram: Working:  When we speak, the servo moves with 60* and return to its original position     Result: The hand of the Ganapati will be attached at the servo and when we speak, the hand moves 60* and return to its original position.   Created & Written By: Soham Abhyankar (5th standard)  Support By : Harshal Shimpi                                     

Electronic, Craft, 3-D Ganesha Material: 2-D design print of Ganesha, Water color ,  Glue, 3-D Printed foundation stand, Sketch pens. Electronic material:  Arduino kit, Jumper wire, PCB, Battery 5 V, Connector, Breadboard, RGB LEDs Tools: Soldering Gun, Scissor Lesson plan: 1. Make a 2-D print of Ganapati on bond paper. 2. Cut the design using scissors. 3. Join the Ganapati body parts as shown in sequence. 4. Paint each part of the body using colors, sketch pen or water color, color should be simple and sober. 5. Attached chakra behind the Ganapati head.. 6. Now placed the Ganpati on the foundation. 7. Write a code for Arduino with ultrasonic sensor. 8.  Connect ultrasonic sensor with Microcontroller and do numbers of practicals, write code in such way that you will get lights on when you will be come in between 30 cm range from the system. 10. Mount the RGB lights on the PCB and soldering it properly. 9. Now attached your electronic system with the Ganapati foundation and do multiple

3-D Ganpati Material / Filament :  PLA Temperature:      Bed Temperature - 70 degree celsius      Nozzle Temperature - 220 degree celsius Working   : 1. First we have to calibrate the axis. 2. We have to see that between the extrude and the bed, there should be a gap of A 4 size of a paper and should be removed by medium strength. Before the model has printed, the bed should be glued up by glue stick. 3. Using USB device we have to give print. 4. After gave the print, we have to check temperature of nozzle 220* and 60* of bed. If it is not automatically raising then we have to  manually give temperature. 5. Then the system will work automatically, as per your design size the printing job will be taking time. Result:  If we do these things correctly, the model becomes neat and tidy. So the model may be a skeleton, a tree, etc. Created By: Soham Abhyankar (5th)