Skip to main content

3d Ganpati

3-D Ganpati


Material / Filament :  PLA

Temperature:

    Bed Temperature - 70 degree celsius

    Nozzle Temperature - 220 degree celsius

Working :

1. First we have to calibrate the axis.

2. We have to see that between the extrude and the bed, there should be a gap of A 4 size of a paper and should be removed by medium strength. Before the model has printed, the bed should be glued up by glue stick.

3. Using USB device we have to give print.

4. After gave the print, we have to check temperature of nozzle 220* and 60* of bed. If it is not automatically raising then we have to  manually give temperature.

5. Then the system will work automatically, as per your design size the printing job will be taking time.




Result: If we do these things correctly, the model becomes neat and tidy. So the model may be a skeleton, a tree, etc.

Created By: Soham Abhyankar (5th)

Comments

Post a Comment

Popular posts from this blog

Introduction to Ultrasonic Technology And Applications At Nalanda Labs:

It is an acronym for Sound Navigation & Ranging (SONAR)   Sonar is the technology of making use of sound waves to navigate, communicate and detect objects which are used for monitoring a particular area 24/7. It detects objects within 180 degrees and up to 8 meters. The word "sonar" comes from the first letters of "sound navigation ranging." Sonar can detect and locate objects under the sea by echoes, much as porpoises and other marine animals navigate using their natural sonar systems. In 1906, American naval architect Lewis Nixon invented the first sonar-like listening device to detect icebergs. During World War I (1914-18), a need to detect submarines increased interest in sonar. French physicist Paul Langévin constructed the first sonar set to detect submarines in 1915. At first, these sonar sets could only "listen" to returning signals. By 1918, Britain and the United States had built sonar sets that could send out, as well as receive, sound ...
2 comments
Read more

Indian Space Research Organisation (ISRO)

Indian Space Research Organisation is the national space agency of  India.  Headquartered in Bangalore, established on 15 August 1969, under the chairman, Scientist Vikram Sarabhai.  It performs tasks related to space based applications, space exploration and development of related technologies. In 1972, the Government of India set up the Department of Space (DOS). This department directly reports to Indian Prime Minister.  ISRO works under the DOS. The Chairman of the ISRO is also the Secretary in the Department of Space.  The Indian space programme was driven by the vision of Vikram Sarabhai, considered the father of the Indian space programme. ISRO Structure  ISRO is managed by the Department of Space (DoS) of the Government of India.  Secretariat of DOS and ISRO Headquarters are located at Antariksh Bhavan in Bangalore. Space scientist K. Sivan is the current chairman of ISRO.  Important ISRO centres -  Satish  Dhawan  Space...
Post a Comment
Read more

Structured Capacity Building of Teachers

To equip teachers with the knowledge and skills required to impart the new curriculum to their peers and students, we are actively engaged in building the capacity of teachers through a series of training and continuous support. In terms of academic intervention, we are actively involved in designing content that aligns with the curriculum. Simultaneously, the model emphasizes teacher capacity building through virtual and in-person training sessions, covering both content and the pedagogy of teaching computer science. The primary objectives of these sessions were threefold: to instigate a paradigm shift in teachers' perspectives regarding the significance of digital literacy for students, introduce and provide training on block-based coding tools like Scratch Jr, and impart effective pedagogical strategies for teaching computer science in classrooms. The initial virtual training took the form of a summer coding camp, engaging 40 teachers during the summer break. This four-week- lon...
Post a Comment
Read more